Transmission Installation - Honda S2000 Service Manual

Manual Transmission
Transmission Installation
1 . I n s t a l l t h e t r a n s m i s s i o n r e a r m o u n t l A i .
1 0 x 1 . 2 5 m m
38 N.m (3.9 kgf.m.28lbf.ft)
Check the two dowel pins are installed in the clutch
h o u s i n g .
Apply super high temp urea grease (P/N 08798-
9002) to the release fork {A), release hanger (B),
a n d r e l e a s e b e a r i n g g u i d e ( C ) . I n s t a l l t h e r e l e a s e
f o r k i n t o t h e o p e n i n g i n t h e c l u t c h h o u s i n g .
{P/N 08798-9002}
13-66
4 . P u l l t h e r e l e a s e f o r k ( A ) o u t u n t i l i t s t o p s . t h e n
wedge a shop towel (B) between the release fork
and clutch housing to hold the release fork in place.
6 .
B
P l a c e t h e t r a n s m i s s i o n o n a t r a n s m i s s i o n j a c k , a n d
r a i s e i t t o t h e e n g i n e l e v e l .
lnstall the three upper transmission mounting bolts.
12 x 1.25 mm
64 N.m (6.5 kgf m. 47 lbt ftl