Trim Removal/Installation - Seat Side Area - Honda S2000 Service Manual

Interior Trim
Trim Removal/lnstallation - Seat Side Area
NOTE:
. Put on gloves to protect your hands.
. When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
. Take care not to bend or scratch the trim and panels.
1. Remove the door sill trim (see page 20-69).
2. Remove the trim as shown.
3. Installthe trim in the reverse order of removal. and note these items:
. Replace any damaged clips.
. Push the clip portions securely into place.
. With removable hardtop: Makesurethe rear window defogger connector is plugged in properly eftside only).
Fastener Locations
A >: Screw,l B ): Screw,2
ftP:ao [D]trn.]I1r]:]r"
<-,/
ROLL BAR
UPPER TRIM
ROLL BAR
LOWER TNIM
F
C > : o i p , ? D > : C l i p , 1
CAP
REAR SIDE TRIM
(Left side with
convertible top only)
GROMMET
(Left side with removable
hardtop only)
CONVERTIBLE TOP
COVER PIN
6 x 1 . 0 m m
REAR WINDOW
DEFOGGER CONNECTOR
(Left side with removable
hardtoD onlv)
REAR
::$
L r [
-
.,f iii-;
l.f\
' " - \
COAT
HANGER
20-70
COAT HANGER
4 N m 10.'l kgt.m,3 lbf.ftl
SIOE TRIM