Honda S2000 Service Manual page 164

Gylinder Head
Cylinder Head Installation (cont'd)
Install the exhaust manifold (A) using new gaskets
(B) and new self-locking nuts (C).
3 1 .
10 x 1 ,25 mm
44 N.m
(4.5 kgf.m.33lbt.ftl
32.
Install the exhaust manifold bracket (D). Make sure
the smooth sides of the washers {E) face the
exhaust manifold bracket.
6-50
\.
34.
Put the exhaust manifold cover on the exhaust
manifo ld.
lnstall the heat shield.
35.
6 x 1 . 0 m m
9.8 N.m {1.0 kgf m,7.2 lbf ft)
Tighten the four bolts securing the exhaust
manifold cover.
8 x '1.25 mm
22 N.m (2.2 kgf.m, 16lbf.ft)
I
8 x L 2 5 m m
22 N.m (2.2 ksf.m, 16lbf.ft)