Honda S2000 Service Manual page 429

8, Measure distance O on the distance cotrar.
. l f d i s t a n c e O i s n o t w i t h i n t h e s t a n d a r d , r e p l a c e
the distance collar with a new one.
. l f d i s t a n c e @ i s w i t h i n t h e s t a n d a r d , g o t o s t e p 9 .
Standard: 32.03 32.08 mm {1.251- 1.263 in.l
Measure the thickness of 5th gear.
. lf the thickness of 5th gear is less than the service
limit, replace sth gear with a new one.
. lf the thickness of 5th gear is within the service
limit, replace the 5th/6th synchro hub with a new
o n e .
Standard: 31.89 31.97 mm {1.256- 1.259 in.)
Service Limit: 31.77 mm (1.251 in.)
9 .
t : - - -
10. Measure the clearance between 6th gear (A) and
the mainshaft (B). lf the clearance is more than the
service limit, go to step 11.
Standard: 0.06 0.19 mm (0.002-0.007 in.l
Service Limit: 0.3 mm (0.012 in.)
Measure the thickness of 6th gear.
. lf thethickness of 6th gear is lessthan the service
limit, replace 6th gear with a new one.
. lf thethickness of 6th gear is within the service
limit, replace the 5th/6th synchro hub with a new
one.
Standard: 28.89 28.97 mm (1.137-1.141 in.)
Service Limit: 28.77 mm 11.133 in.
1 1 .
- - - - . - l
13-29