Debug Obfl - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug obfl

To enable debugging for Onboard Failure Logging (OBFL), use the debug obfl command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
Syntax Description error
info
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example displays the system output when the debug obfl error command is issued:
switch# debug obfl error
2006 Jan 23 21:30:59.573503 obfl: obfl_process_mts_msgs(): OBFL received mts mes
sage: opc:182
Related Commands Command
no debug all
show logging onboard
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug obfl {error | trace}
no debug obfl {error | trace}
Modification
This command was introduced.
Description
Disables all debugging.
Displays OBFL information.
Enables debugging for OBFL error conditions.
Enables debugging for OBFL events.
Cisco MDS 9000 Family Command Reference
debug obfl
6-85