Debug Npv - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug npv

To enable debugging N Port Virtualization (NPV) configuration on the switch, use the debug npv
command.
Syntax Description This command has no other arguments or keywords.
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.2(1)
Usage Guidelines
None.
Examples
The following example shows all NPV debug commands configured on the switch.
switch# show debug npv
N_port Virtualizer:
FC Receive Packets debugging is on
FC Transmit Packets debugging is on
FC Receive Packet header debugging is on
FC Transmit Packet header debugging is on
MTS Receive Packets debugging is on
MTS Transmit Packets debugging is on
MTS Receive Packet header/payload debugging is on
MTS Transmit Packet header/payload debugging is on
High Availability debugging is on
FSM Transitions debugging is on
Error debugging is on
Warning debugging is on
Trace debugging is on
Trace Detail debugging is on
Demux debugging is on
Dequeue debugging is on
Packets debugging is on
Database debugging is on
Timers debugging is on
External Interface FSM Events debugging is on
External Interface FSM Errors debugging is on
External Interface FSM Trace debugging is on
FLOGI FSM Events debugging is on
FLOGI FSM Errors debugging is on
FLOGI FSM Trace debugging is on
Server Interface FSM Events debugging is on
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug npv
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
debug npv
6-83