Anti-Attack; Display Dot1X - 3Com 8807 Command Reference Manual

20
802.1x Configuration
Commands

anti-attack

display dot1x

802.1 C
X ONFIGURATION
Syntax
anti-attack { arp | dot1x | ip }{ disable | enable }
View
System view
Parameter
arp: ARP packet.
dot1x :dot1 packet.
ip: IP packet.
Description
Use the anti-attack { arp | dot1x | ip } enable command to enable packet attack
prevention.
Use the anti-attack { arp | dot1x | ip } disable command to disable packet attack
prevention.
By default, IP packet attack prevention is enabled, and ARP packet attack
prevention and dot1x packet attack prevention are disabled.
Example
# Enable ARP packet attack prevention.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] anti-attack arp enable
# Disable IP packet attack prevention.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] anti-attack ip disable
Syntax
display dot1x [ enabled-interface | guest vlan | interface interface-list |
sessions | statistics ]
C
OMMANDS