clear authentication
dot1x
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
The syntax descriptions for the clear authentication commands have
been separated for clarity. However, the options and behavior for the
clear authentication console command are the same as in previous
releases.
Examples — The following command clears authentication for
administrator Regina:
WX4400# clear authentication console Regina
success: change accepted.
See Also
"clear authentication admin" on page 165
"display aaa" on page 180
"clear authentication dot1x" on page 167
"clear authentication last-resort" on page 168
"clear authentication mac" on page 169
"clear authentication web" on page 170
"set authentication console" on page 191
Removes an 802.1X authentication rule.
Syntax —
clear authentication dot1x {ssid ssid-name | wired}
user-glob
ssid ssid-name
applies.
— Clears a rule used for access over an WX switch's
wired
wired-authentication port.
— A single user or a set of users with 802.1X network
user-glob
access.
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
— SSID name to which this authentication rule
clear authentication dot1x
167