Enabling Cfs To Distribute Ntp Configurations - Cisco Nexus 7000 Series Configuration Manual

Enabling CFS Distribution for Applications
Step 4
This example shows how to enable CFS to distribute IVR configurations:
switch(config)# ivr distribute
switch(config)# show cfs application
----------------------------------------------
Application Enabled Scope
----------------------------------------------
ivr Yes Physical-fc
switch(config)# copy running-config startup-config
[########################################] 100%

Enabling CFS to Distribute NTP Configurations

You can enable CFS to distribute NTP configurations to all Cisco NX-OS devices in the network.
Before You Begin
Make sure that you enable the NTP feature (using the feature ntp command).
Procedure
Step 1
Step 2
Step 3
Step 4
switch# configure terminal
switch(config)# ntp distribute
switch(config)# show ntp status
Distribution : Enabled
switch(config)# copy running-config startup-config
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
30
Command or Action
switch(config)# copy running-config
startup config
Command or Action
switch# configure terminal
switch(config)# ntp distribute
switch(config)# show application-name
status
switch(config)# copy running-config
startup config
Purpose
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Enables CFS to distribute NTP configuration updates.
(Optional)
For the specified application, displays the CFS
distribution status.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Configuring CFS