Debug Core - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

debug core

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug core
To enable core daemon debugging, use the debug core command in EXEC mode. To disable a debug
command use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
error
flow
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug core flow command is issued:
switch# debug core flow
Related Commands
Command
no debug all
show cores
Cisco MDS 9000 Family Command Reference
6-18
debug core {error | flow}
no debug core {error | flow}
Modification
This command was introduced.
Description
Disables all debugging.
Displays all the cores presently available for upload from active supervisor.
Enables debugging for core demon error conditions.
Enables debugging for the core demon flow.
Chapter 6
Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x

Advertisement

Table of Contents
loading

Table of Contents