Debug Ethport - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug ethport

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug ethport
To enable Ethernet port debugging, use the debug ethport command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
Syntax Description
all
error
event
ha
trace
interface gigibetethernet
slot/port
module slot
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug ethport all command is issued:
switch# debug ethport all
1981 May
1981 May
1981 May
MTS_OPC_DEBUG_WRAP_MSG(msg_id 52343) dropped
Related Commands
Cisco MDS 9000 Family Command Reference
6-26
debug ethport {all | error | event [interface gigabitethernet slot/port | module slot] | ha [interface
gigibetethernet slot/port | module slot] | trace [interface gigibetethernet slot/port | module
slot]}
no debug ethport {all | error | event [interface gigabitethernet slot/port | module slot] | ha
[interface gigibetethernet slot/port | module slot] | trace [interface gigibetethernet slot/port
| module slot]}
Modification
This command was introduced.
5 07:28:59 ethport: fu_fsm_execute_all: match_msg_id(0), log_already_open(0)
5 07:28:59 ethport: fu_fsm_execute_all: null fsm_event_list
5 07:28:59 ethport: fu_fsm_engine_post_event_processing: mts msg
Enables debugging for all Ethernet port features.
Enables debugging for Ethernet port error conditions.
Enables debugging for Ethernet port events.
Enables debugging for port high availability.
Enables debugging for Ethernet port traces.
Specifies the slot and port of the Gigabit Ethernet interface.
(Optional) Specifies the slot number of the module being debugged.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x