Debug Dpvm - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug dpvm

To enable debugging for dynamic port VSAN membership (DPVM), use the debug dpvm command in
EXEC mode. To disable a debug command use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description
all
cfs-events
change-events
db-events
errors
ftrace
merge-event
mts-events
pss-events
session-events
snmp-events
sys-events
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, DPVM must be enabled using the dpvm enable command.
Examples
The following example displays the system output when the debug dpvm all command is issued:
switch# debug dpvm all
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug dpvm {all | cfs-events | change-events | db-events | errors | ftrace | merge-event |
mts-events | pss-events | session-events | snmp-events | sys-events}
no debug dpvm {all | cfs-events | change-events | db-events | errors | ftrace | merge-event |
mts-events | pss-events | session-events | snmp-events | sys-events}
Enables debugging for all DPVM.
Enables debugging for Cisco Fabric Services (CFS).
Enables debugging for change events.
Enables debugging for database events.
Enables debugging for error.
Enables debugging for function trace.
Enables debugging for merge events.
Enables debugging for MTS events.
Enables debugging for PSS events.
Enables debugging for session events.
Enables debugging for SNMP events.
Enables debugging for system events.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
debug dpvm
6-23