Debug Exceptionlog - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug exceptionlog

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug exceptionlog
To enable the exception log debugging feature, use the debug exceptionlog command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
demux
deque
error
flow
info
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug exceptionlog command is issued:
switch# debug exceptionlog
7), credit(3), empty
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-28
debug exceptionlog {demux | deque | error | flow | info}
no debug exceptionlog {demux | deque | error | flow | info}
Enables debugging for the exception logger demux functions.
Enables debugging for the exception logger deque function.
Enables debugging for exception logger errors.
Enables debugging for the exception logger flow.
Enables debugging for exception logger information.
Modification
This command was introduced.
Description
Disables all debugging.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x