Dpvm Abort - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

dpvm abort

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
dpvm abort
To discard a dynamic port VSAN membership (DPVM) Cisco Fabric Services (CFS) distribution session
in progress, use the dpvm abort command in configuration mode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example shows how to discard a DPVM CFS distribution session in progress:
switch# config terminal
switch(config)# dpvm abort
Related Commands Command
dpvm database
dpvm distribute
dpvm enable
show dpvm
Cisco MDS 9000 Family Command Reference
5-44
dpvm abort
Modification
This command was introduced.
Description
Configures the DPVM database.
Enables CFS distribution for DPVM.
Enables DPVM.
Displays DPVM information.
Chapter 5 D Commands
OL-18089-01, Cisco NX-OS Release 4.x