Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 338

dpvm auto-learn
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
dpvm auto-learn
To enable the automatic learning feature (autolearn) for the active dynamic port VSAN membership
(DPVM) database, use the dpvm auto-learn command. To disable this feature, use the no form of the
command.
Syntax Description
This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, DPVM must be enabled using the dpvm enable command.
When autolearn is enabled, the system automatically creates the DPVM database by learning about
devices currently logged or newly logged devices with a VSAN. This is a quick way to create the DPVM
which can later be edited. Autolearn features include the following:
•
•
•
•
•
•
Examples The following example shows how to enable autolearning for the DPVM database:
switch# config terminal
switch(config)# dpvm auto-learn
The following example shows how to disable autolearning for the DPVM database:
Cisco MDS 9000 Family Command Reference
5-46
dpvm auto-learn
no dpvm auto-learn
Modification
This command was introduced.
An autolearned entry is created by adding the device PWWN and VSAN to the active DPVM
database.
The active DPVM database must be present when autolearning is enabled.
Autolearned entries can be deleted from the active DPVM database by the user until autolearning is
disabled. Autolearned entries are not permanent in the active DPVM database until autolearning is
disabled.
If a device logs out when autolearning is enabled, the device entry is deleted from the active DPVM
database.
If a particular device logs into the switch multiple times through different ports, then only the VSAN
corresponding to last login is associated with the device.
Autolearn entries do not override previously configured activate entries.
Chapter 5 D Commands
OL-18089-01, Cisco NX-OS Release 4.x