Disable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
discover
To initiate the discovery of hosts, use the discovery command. To disable this feature, use the no form
of the command.
Syntax Description host host port
target target port
vsan vsan id
fabric fabric name
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines None.
Examples The following example discovers a host and specifies a target, a VSAN, and a fabric for discovery:
switch# config t
switch(config)# sme cluster clustername1
switch(config-sme-cl)# discover host 20:00:00:00:c9:49:28:47 target
21:01:00:e0:8b:29:7e:0c vsan 2345 fabric sw-xyz
The following example disables the discovery feature:
switch# config t
switch(config)# sme cluster clustername1
switch(config-sme-cl)# no discover
Related Commands Command
show sme cluster
OL-18089-01, Cisco NX-OS Release 4.x
discover host host port target target port vsan vsan id fabric fabric name
no discover
Identifies the host port WWN. The format is hh:hh:hh:hh:hh:hh:hh:hh.
Identifies the target port WWN. The format is hh:hh:hh:hh:hh:hh:hh:hh.
Selects the VSAN identifier. The range is 1 to 4093.
Specifies the fabric for discovery.The maximum length is 32 characters.
Modification
This command was introduced.
Description
Displays information about the Cisco SME cluster.
Cisco MDS 9000 Family Command Reference
discover
5-33