Transport Email - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

transport email

To configure the customer ID with the Call Home function, use the transport email command in Call
Home configuration submode. To disable this feature, use the no form of the command.
Syntax Description from email-address
reply-to email-address
smtp-server ip-address Specifies the SMTP server address, either DNS name or IP address. The
port port-number
Defaults
None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example configures the from and reply-to e-mail addresses.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# transport email from user@company1.com
switch(config-callhome)# transport email reply-to person@place.com
The following example configures the SMTP server and ports.
switch(config-callhome)# transport email smtp-server 192.168.1.1
switch(config-callhome)# transport email smtp-server 192.168.1.1 port 30
OL-18089-01, Cisco MDS NX-OS Release 4.x
transport email {from email-address | reply-to email-address | smtp-server ip-address [port
port-number]
no transport email {from email-address | reply-to email-address | smtp-server ip-address [port
port-number]
Specifies the from email address. For example: SJ-9500-1@xyz.com. The
maximum length is 255 characters.
Specifies the reply-to email address. For address, example: admin@xyz.com.
The maximum length is 255 characters.
maximum length is 255 characters.
(Optional) Changes depending on the server location. The port usage
defaults to 25 if no port number is specified.
Modification
This command was introduced.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
transport email
23-53