Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1547

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example grants iSLB initiator access to the target using a device alias and an optional
IQN.
switch(config-islb-init)# target device-alias SampleAlias iqn-name
iqn.1987-01.com.cisco.initiator
The following example grants iSLB initiator access to the target using a device alias and a VSAN
identifier.
switch(config-islb-init)#
Note
The following example disables the configured iSLB initiator target.
switch (config-islb-init)# no target pwwn 26:00:01:02:03:04:05:06
Related Commands Command
islb initiator
show islb initiator
show islb initiator detail
show islb initiator
summary
OL-18089-01, Cisco MDS NX-OS Release 4.x
target device-alias SampleAlias vsan 10
The VSAN identifier is optional if the target is online. If the target is not online, the VSAN
identifier is required.
Description
Assigns an iSLB name and IP address to the iSLB initiator and enters
iSLB initiator configuration submode.
Displays iSLB CFS information.
Displays detailed iSLB initiator information.
Displays iSLB initiator summary information.
target (iSLB initiator configuration)
Cisco MDS 9000 Family Command Reference
23-25