NETGEAR ProSafe GSM7224P User Manual page 695

Format
name <cp-name>
Mode
Captive Portal Instance mode
no name
Use this command to remove a configuration name.
Format
no name
Mode
Captive Portal Instance mode
protocol
Use this command to configure the protocol mode for a captive portal configuration. The
default protocol is http.
Default
http
Format
protocol { http | https }
Mode
Captive Portal Instance mode
verification
Use this command to configure the verification mode for a captive portal configuration. User
verification can be configured to allow access for guest users; users that do not have
assigned user names and passwords. User verification can also be configured to allow
access for authenticated users. Authenticated users are required to enter a valid user name
and password that must first be validated against the local database or a RADIUS server.
Network access is granted once user verification has been confirmed.
Default
guest
Format
verification { guest | local | radius }
Mode
Captive Portal Instance mode
group
Use this command to configure a group ID for this captive portal configuration. If a group
number is configured, the user entry (Local or RADIUS) must be configured with the same
name and the group to authenticate to this captive portal instance. The group ID must be
assigned first. If it isn't, use the
default group ID is 1 for a captive portal configuration.
Default
1
Format
group <1-10>
Mode
Captive Portal Instance mode
ProSafe Managed Switch
user group <1-10> command to create the group ID. The
Captive Portal Commands
695