Network Javamode; Show Network; Network Mac-Type - NETGEAR ProSafe GSM7224P User Manual

A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format
network mac-address <macaddr>
Mode
Privileged EXEC

network mac-type

Use this command to specify whether the switch uses the burned in MAC address or the
locally-administered MAC address.
Default
burnedin
Format
network mac-type {local | burnedin}
Mode
Privileged EXEC
no network mac-type
Use this command to reset the value of MAC address to its default.
Format
no network mac-type
Mode
Privileged EXEC

network javamode

Use this command to specify whether or not the switch should allow access to the Java
applet in the header frame of the Web interface. When access is enabled, the Java applet
can be viewed from the Web interface. When access is disabled, the user cannot view the
Java applet.
Default
enabled
Format
network javamode
Mode
Privileged EXEC
no network javamode
Use this command to disallow access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Format
no network javamode
Mode
Privileged EXEC

show network

Use this command to display configuration settings associated with the switch's network
interface. The network interface is the logical interface used for in-band connectivity with the
switch via any of the switch's front panel ports. The configuration parameters associated with
ProSafe Managed Switch
Management Commands
592