NETGEAR ProSafe GSM7224P User Manual page 676

Table 25. IGMP Snooping Log Messages
Component Message
IGMP Snooping Failed to set igmp mrouter mode %d for
interface xxx on Vlan yyy
IGMP Snooping snoopCnfgrInitPhase1Process: Error
allocating small buffers
IGMP Snooping snoopCnfgrInitPhase1Process: Error
allocating large buffers
Table 26. GARP/GVRP/GMRP Log Messages
Component Message
GARP/GVRP/
garpSpanState, garpIfStateChange,
GMRP
GarpIssueCmd,
garpDot1sChangeCallBack,
garpApiCnfgrCommand,
garpLeaveAllTimerCallback,
garpTimerCallback: QUEUE SEND
FAILURE:
GARP/GVRP/
GarpSendPDU: QUEUE SEND FAILURE
GMRP
GARP/GVRP/
garpMapIntfIsConfigurable,
GMRP
gmrpMapIntfIsConfigurable: Error
accessing GARP/GMRP config data for
interface %d in garpMapIntfIsConfigurable.
GARP/GVRP/
garpTraceMsgQueueUsage: garpQueue
GMRP
usage has exceeded fifty/eighty/ninety
percent
GARP/GVRP/
gid_destroy_port: Error Removing port %d
GMRP
registration for vlan-mac %d -
%02X:%02X:%02X:%02X:%02X:%02X
GARP/GVRP/
gmd_create_entry: GMRP failure adding
GMRP
MFDB entry: vlan %d and address %s
ProSafe Managed Switch
Cause
Failed to set VLAN multicast router mode
due to IGMP Snooping message queue
being full
Could not allocate buffers for small IGMP
packets
Could not allocate buffers for large IGMP
packets
Cause
The garpQueue is full, logs specifics of the
message content like internal interface
number, type of message etc.
The garpPduQueue is full, logs specific of
the GPDU, internal interface number, vlan
id, buffer handle etc.
A default configuration does not exist for
this interface. Typically a case when a new
interface is created and has no
pre-configuration.
Traces the build up of message queue.
Helpful in determining the load on GARP.
Mismatch between the gmd (gmrp
database) and MFDB.
MFDB table is full.
Log Messages
676