Show Ip Ospf Asbr - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Spf Runs
The number of times that the intra-area route table has been calculated using this area's
link-state database.
Area Border
The total number of area border routers reachable within this area.
Router Count
Area LSA Count Total number of link-state advertisements in this area's link-state database, excluding AS
External LSA's.
Area LSA
A number representing the Area LSA Checksum for the specified AreaID excluding the
Checksum
external (LS type 5) link-state advertisements.
Import
Shows whether to import summary LSAs.
Summary LSAs
OSPF Stub
The metric value of the stub area. This field displays only if the area is a configured as a
Metric Value
stub area.
The following OSPF NSSA specific information displays only if the area is configured as an
NSSA:
Term Definition
Import
Shows whether to import summary LSAs into the NSSA.
Summary LSAs
Redistribute
Shows whether to redistribute information into the NSSA.
into NSSA
Default
Shows whether to advertise a default route into the NSSA.
Information
Originate
Default Metric
The metric value for the default route advertised into the NSSA.
Default Metric
The metric type for the default route advertised into the NSSA.
Type
Translator Role
The NSSA translator role of the ABR, which is always or candidate.
Translator
The amount of time that an elected translator continues to perform its duties after it
Stability Interval
determines that its translator status has been deposed by another router.
Translator State
Shows whether the ABR translator state is disabled, always, or elected.

show ip ospf asbr

This command displays the internal OSPF routing table entries to Autonomous System
Boundary Routers (ASBR). This command takes no options.
Format
show ip ospf asbr
Mode
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
Routing Commands
294