Show Ip Pim Neighbor - NETGEAR ProSafe GSM7224P User Manual

Hello Interval (secs) 30
Join Prune Interval (secs) 60
DR Priority 1
BSR Border Disabled
Neighbor Count 1
Designated Router 192.168.10.1
Example 2:
(Switch) #show ip pim interface
Interface 1/0/1
Mode Dense
Hello Interval (secs) 30
Join Prune Interval (secs) 60
DR Priority NA
BSR Border Disabled
Neighbor Count 1
Designated Router NA

show ip pim neighbor

This command displays the neighbor information for PIM on the specified interface.
Format
show ip pim neighbor <unit/slot/port>
Modes
Privileged EXEC
Term Definition
Neighbor
The IP address of the PIM neighbor.
Address
Interface
Interface number. Valid slot and port number separated by forward slashes.
UpTime
The time since this neighbor has become active on this interface.
Expiry Time
Time remaining for the neighbor to expire.
DR Priority
DR Priority configured on this Interface [ PIM -SM only ].
(Switch) #show ip pim neighbor 1/0/1
Neighbor Addr Interface Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss) Priority
--------------- --------- ----------- ----------- --------
192.168.10.2 1/0/1 00:02:55 00:01:15 NA
(Switch) #show ip pim neighbor
Neighbor Addr Interface Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss) Priority
--------------- --------- ----------- ----------- --------
192.168.10.2 1/0/1 00:02:55 00:01:15 1
192.168.20.2 1/0/2 00:03:50 00:02:10 1
ProSafe Managed Switch
IP Multicast Commands
331