lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
Format
lacp partner admin state longtimeout
Mode
Interface Config
Note:
This command is only applicable to physical interfaces.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
Format
no lacp partner admin state longtimeout
Mode
Interface Config
Note:
This command is only applicable to physical interfaces.
lacp partner admin state passive
Use this command to set the LACP partner admin state to passive.
Format
lacp partner admin state passive
Mode
Interface Config
Note:
This command is only applicable to physical interfaces.
no lacp partner admin state passive
Use this command to set the LACP partner admin state to active.
Format
no lacp partner admin state passive
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
124