Term
Definition
Destination
Displays whether ICMP Destination Unreachables may be sent (enabled or disabled).
Unreachables
ICMP Redirects Displays whether ICMP Redirects may be sent (enabled or disabled).
The following shows example CLI display output for the command.
(switch)#show ip interface 1/0/2
Routing Interface Status....................... Down
Primary IP Address............................. 1.2.3.4/255.255.255.0
Secondary IP Address(es)....................... 21.2.3.4/255.255.255.0
............................................... 22.2.3.4/255.255.255.0
Helper IP Address.............................. 1.2.3.4
............................................... 1.2.3.5
Routing Mode................................... Disable
Administrative Mode............................ Enable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Local Proxy ARP................................ Disable
Active State................................... Inactive
Link Speed Data Rate........................... Inactive
MAC Address.................................... 00:10:18:82:0C:68
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
Bandwidth...................................... 100000 kbps
Destination Unreachables....................... Enabled
ICMP Redirects................................. Enabled
show ip interface brief
This command displays summary information about IP configuration settings for all ports in
the router.
Format
show ip interface brief
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Interface
Valid slot and port number separated by forward slashes.
State
Routing operational state of the interface.
IP Address
The IP address of the routing interface in 32-bit dotted decimal format.
IP Mask
The IP mask of the routing interface in 32-bit dotted decimal format.
ProSafe Managed Switch
Routing Commands
246