Arp Cachesize; Arp Dynamicrenew; Arp Purge; Arp Resptime - NETGEAR ProSafe GSM7224P User Manual

arp cachesize

This command configures the ARP cache size. The ARP cache size value is a platform
specific integer value. The default size also varies depending on the platform.
Format
arp cachesize <platform specific integer value>
Mode
Global Config
no arp cachesize
This command configures the default ARP cache size.
Format
no arp cachesize
Mode
Global Config

arp dynamicrenew

This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Default
enabled
Format
arp dynamicrenew
Mode
Privileged EXEC
no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format
no arp dynamicrenew
Mode
Privileged EXEC

arp purge

This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format
arp purge <ipaddr>
Mode
Privileged EXEC

arp resptime

This command configures the ARP request response timeout.
ProSafe Managed Switch
Routing Commands
233