Ping Ipv6 - NETGEAR ProSafe GSM7224P User Manual

Prosafe managed switch command line interface (cli) 9.0.2
Hide thumbs Also See for ProSafe GSM7224P:
Table of Contents

Advertisement

ping failure:
In Case of Unreachable Destination:
(Switch) # ping 192.168.254.222 count 3 interval 1 size 255
Pinging 192.168.254.222 with 255 bytes of data:
Received Response: Unreachable Destination
Received Response :Unreachable Destination
Received Response :Unreachable Destination
----192.168.254.222
3 packets transmitted,3 packets received, 0% packet loss
round-trip (msec) min/avg/max = 0/0/0
In Case Of Request TimedOut:
(Switch) # ping 1.1.1.1 count 1 interval 3
Pinging 1.1.1.1 with 0 bytes of data:
----1.1.1.1 PING statistics----
1 packets transmitted,0 packets received, 100% packet loss
round-trip (msec) min/avg/max = 0/0/0

ping ipv6

Use this command to determine whether another computer is on the network. Ping provides
a synchronous response when initiated from the CLI and Web interfaces. To use the
command, configure the switch for network (in-band) connection. The source and target
devices must have the ping utility enabled and running on top of TCP/IP. The switch can be
pinged from any IP workstation with which the switch is connected through the default VLAN
(VLAN 1), as long as there is a physical path between the switch and the workstation. The
terminal interface sends three pings to the target station. Use the
parameter to ping an interface by using the global IPv6 address of the interface. Use the
optional
keyword to specify the size of the ping packet. You can utilize the ping or
size
traceroute facilities over the service/network ports when using an IPv6 global address
ipv6-global-address|hostname
these interfaces will cause IPv6 routes to be installed within the IP stack such that the ping or
traceroute request is routed out the service/network port properly. When referencing an IPv6
link-local address, you must also specify the service or network port interface by using the
or
serviceport
network
Defaults
• The default count is 1.
• The default interval is 3 seconds.
• The default size is 0 bytes.
Format
ping ipv6 {<ipv6-global-address|<hostname>} [size <datagram-size>]
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
PING statistics----
. Any IPv6 global address or gateway assignments to
parameter.
Utility Commands
532
ipv6-address|hostname

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents