Show Forwardingdb Agetime; Show Mac-Address-Table Multicast - NETGEAR ProSafe GSM7224P User Manual

no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format
no bridge aging-time
Mode
Global Config

show forwardingdb agetime

This command displays the timeout for address aging.
Default
300s
Format
show forwardingdb agetime
Mode
Privileged EXEC
Term Definition
Address Aging
This parameter displays the address aging timeout for the associated forwarding
Timeout
database.

show mac-address-table multicast

This command displays the Multicast Forwarding Database (MFDB) information. If you enter
the command with no parameter, the entire table is displayed. You can display the table entry
for one MAC Address by specifying the MAC address as an optional parameter.
Format
show mac-address-table multicast <macaddr>
Mode
Privileged EXEC
Term Definition
MAC Address
A multicast MAC address for which the switch has forwarding and or filtering information.
The format is two-digit hexadecimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC
address and VLAN ID combination of 8 bytes.
Type
The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Component
The component that is responsible for this entry in the Multicast Forwarding Database.
Possible values are IGMP Snooping, GMRP, and Static Filtering.
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Forwarding
The resultant forwarding list is derived from combining all the component's forwarding
Interfaces
interfaces and removing the interfaces that are listed as the static filtering interfaces.
ProSafe Managed Switch
Switching Commands
214