O/S Support - NETGEAR ProSafe GSM7224P User Manual

Table 54. System General Error Messages
Component Message
OS
USL: failed to sync L3 Route table on unit=
x
OS
USL: failed to sync initiator table on unit=x
OS
USL: failed to sync terminator table on
unit=x
OS
USL: failed to sync ip-multicast table on
unit=x

O/S Support

Table 55. OSAPI Log Messages
Component Message
OSAPI
ftruncate failed – File resides on a
read-only file system.
OSAPI
ftruncate failed – File is open for reading
only.
OSAPI
ftruncate failed – File descriptor refers to a
file on which this operation is impossible.
OSAPI
ftruncate failed – Returned an unknown
code in errno.
OSAPI
ping: bad host!
OSAPI
osapiTaskDelete: Failed for (XX) error YYY The requested task can not be deleted
ProSafe Managed Switch
Cause
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Cause
ftruncate is called to correctly set the file's
size in the file system after a write. The file
system is R/W so this msg indicates the file
system may be corrupted.
ftruncate is called to correctly set the file's
size in the file system after a write. The file
is opened for R/W so this msg indicates the
file system may be corrupted.
ftruncate is called to correctly set the file's
size in the file system after a write. This
msg indicates the file system may be
corrupted.
ftruncate is called to correctly set the file's
size in the file system after a write. This
msg indicates the file system may be
corrupted.
The address requested to ping can not be
converted to an Internet address.
because: the requested deletion is called
from an ISR, the task is already deleted, or
the task ID is invalid.
Log Messages
688