Lacp Partner Admin State Individual; Lacp Partner Admin Key - NETGEAR ProSafe GSM7224P User Manual

no lacp actor system priority
Use this command to configure the priority value associated with the Actor's SystemID.
Format
no lacp actor system priority
Mode
Interface Config

lacp partner admin key

Use this command to configure the administrative value of the Key for the protocol partner.
The valid range for <key> is 0 to 65535.
Default
0x0
Format
lacp partner admin key
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
Format
no lacp partner admin key <key>
Mode
Interface Config

lacp partner admin state individual

Use this command to set LACP partner admin state to individual.
Format
lacp partner admin state individual
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
Format
no lacp partner admin state individual
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
123