Show Ip Dhcp Global Configuration; Show Ip Dhcp Pool Configuration - NETGEAR ProSafe GSM7224P User Manual

Term Definition
IP address
The IP address of the client.
Hardware
The MAC Address or the client identifier.
Address
Lease
The lease expiration time of the IP address assigned to the client.
expiration
Type
The manner in which IP address was assigned to the client.

show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp global configuration
Modes
• Privileged EXEC
• User EXEC
Term Definition
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping
The maximum number of Ping Packets that will be sent to verify that an ip address id not
Packets
already assigned.
Conflict
Shows whether conflict logging is enabled or disabled.
Logging
BootP
Shows whether BootP for dynamic pools is enabled or disabled.
Automatic

show ip dhcp pool configuration

This command displays pool configuration. If all is specified, configuration for all the pools
is displayed.
Format
show ip dhcp pool configuration {<name> | all}
Modes
• Privileged EXEC
• User EXEC
Field Definition
Pool Name
The name of the configured pool.
Pool Type
The pool type.
Lease Time
The lease expiration time of the IP address assigned to the client.
DNS Servers
The list of DNS servers available to the DHCP client .
Default Routers
The list of the default routers available to the DHCP client
ProSafe Managed Switch
Utility Commands
553