Area Range (Ospfv); Area Stub (Ospfv) - NETGEAR ProSafe GSM7224P User Manual

no area nssa translator-stab-intv (OSPFv3)
This command disables the nssa translator's <stabilityinterval> from the specified
area id.
Format
no area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
Router OSPF Config
area range (OSPFv3)
This command creates a specified area range for a specified NSSA. The <ipaddr> is a valid
IP address. The <subnetmask> is a valid subnet mask. The LSDB type must be specified
by either summarylink or nssaexternallink, and the advertising of the area range can
be allowed or suppressed.
Format
area <areaid> range <ipv6-prefix> <prefix-length> {summarylink |
nssaexternallink} [advertise | not-advertise]
Mode
Router OSPFv3 Config
no area range(OSPFv3)
This command deletes a specified area range. The <ipaddr> is a valid IP address. The
<subnetmask> is a valid subnet mask.
Format
no area <areaid> range <ipv6-prefix> <prefix-length>
Mode
Router OSPFv3 Config
area stub (OSPFv3)
This command creates a stub area for the specified area ID. A stub area is characterized by
the fact that AS External LSAs are not propagated into the area. Removing AS External LSAs
and Summary LSAs can significantly reduce the link state database of routers within the stub
area.
Format
area <areaid> stub
Mode
Router OSPFv3 Config
no area stub(OSPFv3)
This command deletes a stub area for the specified area ID.
Format
no area <areaid> stub
Mode
Router OSPFv3 Config
ProSafe Managed Switch
IPv6 Commands
383