Mvr Type; Mvr Vlan Group - NETGEAR ProSafe GSM7224P User Manual

received from other interested hosts that are also connected to that port, for example,
using hub.
• In immediate leave mode, when a leave is received, the switch is immediately
reconfigured not to forward a specific multicast stream to the port where a message is
received. This mode is used only for ports where only one client might be connected.
Format
mvr immediate
Mode Interface Config
Default Disabled
no mvr immediate
This command sets the MVR multicast VLAN to the default value.
Format
no mvr immediate
Mode Interface Config

mvr type

This command sets the MVR port type. When a port is set as source, it is the port to which the
multicast traffic flows using the multicast VLAN. When a port is set to receiver, it is the port where
a listening host is connected to the switch.
Format
mvr type { receiver|source }
Mode Interface Config
Default none
no mvr type
Use this command to set the MVR port type to none.
Format
no mvr type
Mode Interface Config

mvr vlan group

Use this command to include the port in the specific MVR group. <mVLAN> is the multicast
VLAN, and <A.B.C.D> is the IP multicast group
Format
mvr vlan <mVLAN> group <A.B.C.D>
Mode Interface Config
ProSafe Managed Switch
Multicast VLAN Registration (MVR)
226