Ipv6 Nd Managed-Config-Flag; Ipv6 Nd Ns-Interval; Ipv6 Nd Other-Config-Flag - NETGEAR ProSafe GSM7224P User Manual

ipv6 nd managed-config-flag

This command sets the "managed address configuration" flag in router advertisements.
When the value is true, end nodes use DHCPv6. When the value is false, end nodes
automatically configure addresses.
Default
false
Format
ipv6 nd managed-config-flag
Mode
Interface Config
no ipv6 nd managed-config-flag
This command resets the "managed address configuration" flag in router advertisements to
the default value.
Format
no ipv6 nd managed-config-flag
Mode
Interface Config

ipv6 nd ns-interval

This command sets the interval between router advertisements for advertised neighbor
solicitations, in milliseconds. An advertised value of 0 means the interval is unspecified.
Default
0
Format
ipv6 nd ns-interval {<1000-4294967295> | 0}
Mode
Interface Config
no ipv6 nd ns-interval
This command resets the neighbor solicit retransmission interval of the specified interface to
the default value.
Format
no ipv6 nd ns-interval
Mode
Interface Config

ipv6 nd other-config-flag

This command sets the "other stateful configuration" flag in router advertisements sent from
the interface.
Default
false
Format
ipv6 nd other-config-flag
Mode
Interface Config
ProSafe Managed Switch
IPv6 Commands
361