NETGEAR ProSafe GSM7224P User Manual page 687

Table 54. System General Error Messages
Component Message
OS
USL: A Trunk being created by bcmx
already existed in USL
OS
USL: A Trunk being destroyed doesn't exist
in USL
OS
USL: A Trunk being set doesn't exist in USL Possible synchronization issue between
OS
USL: failed to sync trunk table on unit=x
OS
USL: Mcast entry not found on a join
OS
USL: Mcast entry not found on a leave
OS
USL: failed to sync dvlan data on unit=x
OS
USL: failed to sync policy table on unit=x
OS
USL: failed to sync VLAN table on unit=x
OS
Invalid LAG id x
OS
Invalid uport calculated from the BCM uport
bcmx_l2_addr->lport = x
OS
Invalid USP calculated from the BCM
uport\nbcmx_l2_addr->lport = x
OS
Unable to insert route R/P
OS
Unable to Insert host H
OS
USL: failed to sync L3 Intf table on unit=x
OS
USL: failed to sync L3 Host table on unit=x Could not synchronize unit x due to a
ProSafe Managed Switch
Cause
Possible synchronization issue between
the application, hardware, and sync layer
Possible synchronization issue between
the application, hardware, and sync layer.
the application, hardware, and sync layer.
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Possible synchronization issue between
the application, hardware, and sync layer
Possible synchronization issue between
the application, hardware, and sync layer
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Possible synchronization issue between
the BCM driver and HAPI
Uport not valid from BCM driver.
USP not able to be calculated from the
learn event for BCM driver.
Route 'R' with prefix 'P' could not be
inserted in the hardware route table. A retry
will be issued.
Host 'H' could not be inserted in hardware
host table. A retry will be issued.
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
transport failure or API issue on remote
unit. A synchronization retry will be issued
Log Messages
687