Ip Dvmrp Trapflags; Show Ip Dvmrp - NETGEAR ProSafe GSM7224P User Manual

no ip dvmrp metric
This command resets the metric for an interface to the default value. This value is used in the
DVMRP messages as the cost to reach this network.
Format
no ip dvmrp metric
Mode
Interface Config

ip dvmrp trapflags

This command enables the DVMRP trap mode.
Default
disabled
Format
ip dvmrp trapflags
Mode
Global Config
no ip dvmrp trapflags
This command disables the DVMRP trap mode.
Format
no ip dvmrp trapflags
Mode
Global Config
ip dvmrp
This command sets the administrative mode of DVMRP on an interface to active.
Default
disabled
Format
ip dvmrp
Mode
Interface Config
no ip dvmrp
This command sets the administrative mode of DVMRP on an interface to inactive.
Format
no ip dvmrp
Mode
Interface Config

show ip dvmrp

This command displays the system-wide information for DVMRP.
Format
show ip dvmrp
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
IP Multicast Commands
325