Area Stub No-Summary (Ospf); Area Virtual-Link (Ospf); Area Virtual-Link Authentication - NETGEAR ProSafe GSM7224P User Manual

area stub no-summary (OSPF)

This command configures the Summary LSA mode for the stub area identified by <areaid>.
Use this command to prevent LSA Summaries from being sent.
Default
disabled
Format
area <areaid> stub no-summary
Mode
Router OSPF Config
no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by
<areaid>.
Format
no area <areaid> stub no-summary
Mode
Router OSPF Config

area virtual-link (OSPF)

This command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format
area <areaid> virtual-link <neighbor>
Mode
Router OSPF Config
no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor.
Format
no area <areaid> virtual-link <neighbor>
Mode
Router OSPF Config

area virtual-link authentication

This command configures the authentication type and key for the OSPF virtual interface
identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor. The value for <type> is either none, simple, or encrypt. The [key] is
composed of standard displayable, non-control keystrokes from a Standard 101/102-key
keyboard. The authentication key must be 8 bytes or less if the authentication type is simple.
If the type is encrypt, the key may be up to 16 bytes. Unauthenticated interfaces do not need
an authentication key. If the type is encrypt, a key id in the range of 0 and 255 must be
ProSafe Managed Switch
Routing Commands
274