Redirect (Captive Portal) - NETGEAR ProSafe GSM7224P User Manual

no group
Use this command to reset the group number to the default.
Default
1
Format
no group <1-10>
Mode
Captive Portal Instance mode

redirect (Captive Portal)

Use this command to enable the redirect mode for a captive portal configuration. Use the "no"
form of this command to disable redirect mode.
Default
disable
Format
redirect
Mode
Captive Portal Instance mode
no redirect
Use this command to disable redirect mode.
Format
no redirect
Mode
Captive Portal Instance mode
redirect-url
Use this command to configure the redirect URL for a captive portal configuration. The url is
the URL for redirection which can be up to 512 characters in length.
Format
redirect-url url
Mode
Captive Portal Instance mode
max-bandwidth-down
Use this command configures the maximum rate at which a client can receive data from the
network. The rate is in bits per seconds. 0 indicates limit not enforced.
Default
0
Format
max-bandwidth-down <0-536870911>
Mode
Captive Portal Instance mode
ProSafe Managed Switch
Captive Portal Commands
696