Shutdown All - NETGEAR ProSafe GSM7224P User Manual

Note: You can use the shutdown command on physical and port-channel
(LAG) interfaces, but not on VLAN routing interfaces.
Format
shutdown
Mode
Interface Config
no shutdown
This command enables a port.
Format
no shutdown
Mode
Interface Config

shutdown all

This command disables all ports.
Note: You can use the shutdown all command on physical and
port-channel (LAG) interfaces, but not on VLAN routing interfaces.
Format
shutdown all
Mode
Global Config
no shutdown all
This command enables all ports.
Format
no shutdown all
Mode
Global Config
speed
This command sets the speed and duplex setting for the interface.
Format
speed {<100 | 10> <half-duplex | full-duplex>}
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
41