Show Users Accounts; Show Users Accounts Detail - NETGEAR ProSafe GSM7224P User Manual

Term Definition
User Name
The name the user enters to login using the serial port, Telnet or Web.
Access Mode
Shows whether the user is able to change parameters on the switch (Read/Write) or is
only able to view them (Read Only). As a factory default, the "admin" user has
Read/Write access and the "guest" has Read Only access. There can only be one
Read/Write user and up to five Read Only users.
SNMPv3
The SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user is able
Access Mode
to set and retrieve parameters on the system. If the value is set to ReadOnly, the
SNMPv3 user is only able to retrieve parameter information. The SNMPv3 access mode
may be different than the CLI and Web access mode.
SNMPv3
The authentication protocol to be used for the specified login user.
Authentication
SNMPv3
The encryption protocol to be used for the specified login user.
Encryption

show users accounts

Use this command to display the local user status with respect to user account lockout and
password aging.
Format
show users accounts
Mode
Privileged EXEC
Term Definition
User Name
The local user account's user name.
Privilege
The user's privilege level (1-15).
Password aging
The password aging time for the local users.
Lockout Status
Indicates whether the user account is locked out (true or false).
Password
The current password expiration date in date format.
Expiration Date

show users accounts detail

This command displays the local user status with respect to user account lockout and
password aging. It also includes information about Password strength and complexity.
Format
show users accounts detail
Mode
Privileged EXEC
(Switch) #show users accounts detail
UserName....................................... admin
Privilege...................................... 15
Password Aging................................. ---
Password Expiry................................ ---
ProSafe Managed Switch
Management Commands
616