Set Gvrp Adminmode; Set Gvrp Interfacemode; Show Gvrp Configuration - NETGEAR ProSafe GSM7224P User Manual

set gvrp adminmode

This command enables GVRP on the system.
Default
disabled
Format
set gvrp adminmode
Mode
Privileged EXEC
no set gvrp adminmode
This command disables GVRP.
Format
no set gvrp adminmode
Mode
Privileged EXEC

set gvrp interfacemode

This command enables GVRP on a single port (Interface Config mode) or all ports (Global
Config mode).
Default
disabled
Format
set gvrp interfacemode
Mode
• Interface Config
• Global Config
no set gvrp interfacemode
This command disables GVRP on a single port (Interface Config mode) or all ports (Global
Config mode). If GVRP is disabled, Join Time, Leave Time and Leave All Time have no
effect.
Format
no set gvrp interfacemode
Mode
• Interface Config
• Global Config

show gvrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one
or all interfaces.
Format
show gvrp configuration {<unit/slot/port> | all}
Mode
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
Switching Commands
88