Show Diffserv Service; Show Diffserv Service Brief - NETGEAR ProSafe GSM7224P User Manual

show diffserv service

This command displays policy service information for the specified interface and direction.
The <unit/slot/port> parameter specifies a valid unit/slot/port number for the system.
Format
show diffserv service <unit/slot/port> [in | out]
Mode
Privileged EXEC
Term Definition
DiffServ Admin
The current setting of the DiffServ administrative mode. An attached policy is only in
Mode
effect on an interface while DiffServ is in an enabled mode.
Interface
Valid slot and port number separated by forward slashes.
Direction
The traffic direction of this interface service.
Operational
The current operational status of this DiffServ service interface.
Status
Policy Name
The name of the policy attached to the interface in the indicated direction.
Policy Details
Attached policy details, whose content is identical to that described for the show
policy-map <policymapname> command (content not repeated here for brevity).

show diffserv service brief

This command displays all interfaces in the system to which a DiffServ policy has been
attached. The inbound direction parameter is optional.
Format
show diffserv service brief [in | out]
Mode
Privileged EXEC
Term Definition
DiffServ Admin
The current setting of the DiffServ administrative mode. An attached policy is only active
Mode
on an interface while DiffServ is in an enabled mode.
The following information is repeated for interface and direction (only those interfaces
configured with an attached policy are shown):
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Direction
The traffic direction of this interface service.
OperStatus
The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.
ProSafe Managed Switch
Quality of Service (QoS) Commands
468