Show Ip Access-Lists - NETGEAR ProSafe GSM7224P User Manual

show ip access-lists

This command displays an IP ACL <accesslistnumber> is the number used to identify
the IP ACL.
Format
show ip access-lists <accesslistnumber>
Mode
Privileged EXEC
Note: Only the access list fields that you configure are displayed.
Term Definition
Rule Number
The number identifier for each rule that is defined for the IP ACL.
Action
The action associated with each rule. The possible values are Permit or Deny.
Match All
Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol
The protocol to filter for this rule.
Source IP
The source IP address for this rule.
Address
Source IP Mask The source IP Mask for this rule.
Source L4 Port
The source port for this rule.
Keyword
Destination IP
The destination IP address for this rule.
Address
Destination IP
The destination IP Mask for this rule.
Mask
Destination L4
The destination port for this rule.
Port Keyword
IP DSCP
The value specified for IP DSCP.
IP Precedence
The value specified IP Precedence.
IP TOS
The value specified for IP TOS.
Log
Displays when you enable logging for the rule.
Assign Queue
The queue identifier to which packets matching this rule are assigned.
Mirror Interface The unit/slot/port to which packets matching this rule are copied.
Redirect
The unit/slot/port to which packets matching this rule are forwarded.
Interface
ProSafe Managed Switch
Quality of Service (QoS) Commands
480