Ip Address Conflict Commands; Show License Features; Ip Address-Conflict-Detect Run - NETGEAR ProSafe GSM7224P User Manual

License copy : 1
License Status: Active
Description : License key is active.
(Managed Switches) #

show license features

This command displays the features that are licensed on the switch
Format
show license features
Mode
Privileged EXEC
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license features
IGMP
MCAST
PIMDM
DVMRP
PIMSM
OSPFV3
IPV6

IP Address Conflict Commands

ip address-conflict-detect run

This command triggers the switch to run active address conflict detection by sending
gratuitous ARP packets for IPv4 addresses on the switch.
Note: This command takes effect only once after it is executed and cannot
be saved across power cycles.
Format
ip address-conflict-detect run
Mode
Global Config
ProSafe Managed Switch
Utility Commands
585