Capability Opaque; Clear Ip Ospf; Clear Ip Ospf Configuration; Clear Ip Ospf Counters - NETGEAR ProSafe GSM7224P User Manual

no bandwidth
Use this command to set the interface bandwidth to its default value.
Format
no bandwidth
Mode
Interface Config

capability opaque

Use this command to enable Opaque Capability on the Router. The information contained in
Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to
distribute information throughout the OSPF domain. The 7000 series supports the storing and
flooding of Opaque LSAs of different scopes.
Default
disabled
Format
capability opaque
Mode
Router OSPF Config
no capability opaque
Use this command to disable opaque capability on the router.
Format
no capability opaque
Mode
Router OSPF Config

clear ip ospf

Use this command to disable and re-enable OSPF.
Format
clear ip ospf
Mode
Privileged EXEC

clear ip ospf configuration

Use this command to reset the OSPF configuration to factory defaults.
Format
clear ip ospf configuration
Mode
Privileged EXEC

clear ip ospf counters

Use this command to reset global and interface statistics.
Format
clear ip ospf counters
Mode
Privileged EXEC
ProSafe Managed Switch
Routing Commands
278