Show Ip Igmp Interface Membership; Show Ip Igmp Interface Stats - NETGEAR ProSafe GSM7224P User Manual

show ip igmp interface membership

This command displays the list of interfaces that have registered in the multicast group.
Format
show ip igmp interface membership <multiipaddr> [detail]
Mode
Privileged EXEC
Term Definition
Interface
Valid unit, slot and port number separated by forward slashes.
Interface IP
The IP address of the interface participating in the multicast group.
State
The interface that has IGMP in Querier mode or Non-Querier mode.
Group
The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
Compatibility
Mode
Source Filter
The source filter mode (Include/Exclude) for the specified group on this interface. This is
Mode
"-----" for IGMPv1 and IGMPv2 Membership Reports.
If you use the detail keyword, the following fields appear:
Term Definition
Interface
Valid unit, slot and port number separated by forward slashes.
Group
The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
Compatibility
Mode
Source Filter
The source filter mode (Include/Exclude) for the specified group on this interface. This is
Mode
"-----" for IGMPv1 and IGMPv2 Membership Reports.
Source Hosts
The list of unicast source IP addresses in the group record of the IGMPv3 Membership
Report with the specified multicast group IP address. This is "-----" for IGMPv1 and
IGMPv2 Membership Reports.
Expiry Time
The amount of time remaining to remove this entry before it is aged out. This is "-----" for
IGMPv1 and IGMPv2 Membership Reports.

show ip igmp interface stats

This command displays the IGMP statistical information for the interface. The statistics are
only displayed when the interface is enabled for IGMP.
Format
show ip igmp interface stats <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
IP Multicast Commands
346