Lldp-Med Commands - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the local device.
System
Describes the local system by identifying the system name and versions of hardware,
Description
operating system, and networking software supported in the device.
Port
Describes the port in an alpha-numeric format.
Description
System
Indicates the primary function(s) of the device.
Capabilities
Supported
System
Shows which of the supported system capabilities are enabled.
Capabilities
Enabled
Management
The type of address and the specific address the local LLDP agent uses to send and
Address
receive information.

LLDP-MED Commands

Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057)
provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for
network configuration and policy, device location, Power over Ethernet (PoE) management
and inventory management.
lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the
transmit and receive function of LLDP.
Default
enabled
Format
lldp med
Mode
Interface Config
no lldp med
Use this command to disable MED.
Format
no lldp med
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
194