Clear Logging Email Statistics - NETGEAR ProSafe GSM7224P User Manual

Term
No of Email Sent
Time Since Last Email
Sent

clear logging email statistics

This command resets the email alerting statistics.
Format
clear logging email statistics
Mode
Privileged EXEC
mail-server
Use this command to configure the SMTP server to which the switch sends email alert
messages and change the mode to Mail Server Configuration mode. The server address can
be in the IPv4, IPv6, or DNS name format.
Format
mail-server {ip-address | ipv6-address | hostname}
Mode
Global Config
no mail-server
Use this command to remove the specified SMTP server from the configuration.
Format
no mail-server {ip-address | ipv6-address | hostname}
Mode
Global Config
Security
Use this command to set the email alerting security protocol by enabling the switch to use
TLS authentication with the SMTP Server. If the TLS mode is enabled on the switch but the
SMTP sever does not support TLS mode, no email is sent to the SMTP server.
Default
none
Format
security {tlsv1 | none}
Mode
Mail Server Config
ProSafe Managed Switch
Definition
The number of email messages that were sent from the switch since the
counter was cleared.
The amount of time that has passed since the last email was sent from the
switch.
Utility Commands
525