The value for <seconds> is a valid positive integer, which represents the IP ARP entry
response timeout time in seconds. The range for <seconds> is between 1-10 seconds.
Default
1
Format
arp resptime <1-10>
Mode
Global Config
no arp resptime
This command configures the default ARP request response timeout.
Format
no arp resptime
Mode
Global Config
arp retries
This command configures the ARP count of maximum request for retries.
The value for <retries> is an integer, which represents the maximum number of request
for retries. The range for <retries> is an integer between 0-10 retries.
Default
4
Format
arp retries <0-10>
Mode
Global Config
no arp retries
This command configures the default ARP count of maximum request for retries.
Format
no arp retries
Mode
Global Config
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry
ageout time in seconds. The range for <seconds> is between 15-21600 seconds.
Default
1200
Format
arp timeout <15-21600>
Mode
Global Config
ProSafe Managed Switch
Routing Commands
234