NETGEAR ProSafe GSM7224P User Manual page 677

Table 27. 802.3ad Log Messages
Component Message
802.3ad
dot3adReceiveMachine: received default
event %x
802.3ad
dot3adNimEventCompletionCallback,
dot3adNimEventCreateCompletionCallbac
k: DOT3AD: notification failed for
event(%d), intf(%d), reason(%d)
Table 28. FDB Log Message
Component Message
FDB
fdbSetAddressAgingTimeOut: Failure
setting fid %d address aging timeout to %d
Table 29. Double VLAN Tag Log Message
Component Message
Double Vlan
dvlantagIntfIsConfigurable: Error accessing
Tag
dvlantag config data for interface %d
Table 30. IPv6 Provisioning Log Message
Component Message
IPV6
ipv6ProvIntfIsConfigurable: Error accessing
Provisioning
IPv6 Provisioning config data for interface
%d
Table 31. MFDB Log Message
Component Message
MFDB
mfdbTreeEntryUpdate: entry does not exist Trying to update a non existing entry
ProSafe Managed Switch
Cause
Received a LAG PDU and the RX state
machine is ignoring this LAGPDU
The event sent to NIM was not completed
successfully
Cause
Unable to set the age time in the hardware
Cause
A default configuration does not exist for
this interface. Typically a case when a new
interface is created and has no
pre-configuration.
Cause
A default configuration does not exist for
this interface. Typically a case when a new
interface is created and has no
pre-configuration.
Cause
Log Messages
677